The Solution for Apple Mac not turning on.

Isn’t your Mac getting a start? Whatever is the reason behind this issue, here we have come up with simple steps to solve this problem.

Check if it gets the start

Press the power button on your Mac system, check if it creates a startup sound or you hear any fan or drive noise. If it doesn’t work at all, then follow the given steps:

·       Check the Power connection

Make sure that your Apple Mac is powered on and it is plugged in correctly. Be sure that the battery in not dead and if it needs charging, give it 

sometime to charge it.

·       Use another power cable or adapter

There may be a fault in the power cable like physical damage or broken form somewhere. Try connecting it with another power cable and see if it resolves the issue. If there was a power cut, it may be possible that power adapter of your Mac has been damaged. You may require replacing it if this is the actual problem.

·       Cut off all the accessories attached to the Mac. It could be possible that one of your devices is creating issues with the startup sequence.

If you installed a new RAM on your Mac then make sure it was installed properly and is compatible. You can try a reset of the SMC if this doesn’t help you.

·       Do a power cycle which will force your system to reboot. Hold down the power buttons for 10 seconds and then check your system if it gets started.
Once you follow all these instructions, your problem will be resolved if not, then you can try launching disk utility in recovery mode and also boot up your Mac in safe mode.

Connect with Macbook Service Centre and avail our instant help regarding your issues. Feel free to contact us at any time as we are available instantly on your one call.


Popular posts from this blog

What if your Apple device shows an error when creating an iCloud backup?

How to Set up ‘Find My iPhone’ on all your Apple devices?

Steps to troubleshoot Logic Board Issues on Macbook